Fiat 500 Key Fob Replacement
If your 500 key fob fails to function, try using another one to see if your car will recognize it. If it does, the issue may be with the battery or water damage to the original fob.
Replace the battery first. The "+" side should be facing downwards.
Dead Battery
The battery is typically the reason behind the fob not functioning. It's easy to fix and the majority of fobs will notify you that the battery is low. There are instructions on YouTube for almost any car's key fob or look in the owner's manual. You can also bring it to an area locksmith or the dealer that supplied it to you to repair it.
Sometimes, a fob will be inoperable and there could be a problem with the circuit board in the internal circuit. This isn't a lot of common but it can occur. The internal chip can be damaged in the event that you drop the fob onto something that is hard. It could be a problem if you have an aftermarket fob and it doesn't work. In fiat punto key 'll need to go to a dealer or a locksmith and have it reconfigured to work with your 500.
One 2012 FIAT 500 Flip Key Remote that resembles Ilco brand with trunk, lock and lock buttons. It is a replacement keyless entry remote (will require cutting and programmed by locksmith)
Chip Damaged
A fiat 500 key fob is an wireless device that sends an indication for the car to start once you press the button. It is equipped with a microchip that contains information about the code needed to connect with your car. If the chip is damaged it will not transmit the correct code and the car won't begin. Locksmiths can fix this type of damage. United Locksmith can complete this service on both classic and modern models, so don't hesitate to contact us.
Locksmiths can program a new key fob. It is cheaper to do this rather than going to a dealer and it works the same way. You will need to provide certain details to the locksmith, for example, the year in which your car was built and the model.
Rub the chip with an old dollar bill if not certain what to do. The copper in the bill is abrasive enough to get rid of dirt and oxidation but won't cause any damage to the microchip. If the chip is physically damaged it might not be in a position to be repaired. This can happen when you drop it or get it pushed over by your vehicle.
Water Damage
Water damage is likely to occur on your key, regardless of whether you dropped them in the pool accidentally, left them in a pocket while swimming, or splashed water on them during a rainy afternoon. Even if it only has a small amount of water on its key, it could cause serious problems for its electronics and hinder it from functioning correctly.
It is possible to solve this problem by taking the fob out and cleaning it with a towel. Once the fob has dried it is possible to replace its battery. It should then start functioning normally.
You could also take your fob to a local locksmith shop or auto shop to get it professionally cleaned and programmed. These experts can make use of special equipment to make sure that the key fob is compatible with the car's computers.
If your Fiat 500's main fob fails to function, it can be stressful and frustrating. It's costly and time-consuming to take your key fob to the dealer. Locksmiths can handle all aspect of the replacement of your car's key fob without the necessity of a dealership visit. They are a far better choice than the dealership.
Pairing Issues
If you accidentally drop your keyfob or it stops working and nothing else seems to be wrong, it could be the chip. It could be due to water damage, a dead battery or it may just need reprogramming.
In most cases, this can be done by following the steps in the owner's manual. However it's a good idea to have an automotive locksmith do this if you're having problems or if the directions in your manual aren't working for you. This will ensure that the chip isn't fried and will likely be the least expensive option.
Another issue with 500 owners is that the key fob will not secure the car. This could be a major issue if you're going to an gas station to refill. Some owners have reported their 500's locking mechanism failing and requiring replacement of the entire steering intermediate shaft. This issue was cited in a technical service bulletin (TSB) by Fiat.
If you're experiencing issues with your Fiat car, the services of a reliable locksmith can help. They can duplicate your current key or create a new key that locks and starts the vehicle. They can accomplish this without having to see your key, and are typically much less expensive than purchasing it from a dealer.